[modeleng] Re: plastic pipe

From: "Clif Walker" <clif.gwr@xxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Mon, 24 Apr 2006 09:55:43 +0100

Hi Alan,

Most of the domestic plumbing plastic pipe is rated  6 Bar at 180 degrees F.
Therefore I dont think that it will take steam.

Clif


----- Original Message ----- 
From: "alan stepney" <alan@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, April 24, 2006 2:19 AM
Subject: [modeleng] plastic pipe


> Does anyone know of any plastic pipe that will withstand low pressure
> (around 25-30psi) steam.?
> That is a temperature of around 275F, and I would have thought that may be
> within the range of some modern plastics.
>
> Alan
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.385 / Virus Database: 268.4.5/322 - Release Date: 22/04/2006
> 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

References:

[modeleng] Re: Lathe Bed Re- Grinding
From: tim martin

[modeleng] plastic pipe
From: alan stepney

[modeleng] Re: plastic pipe

Other related posts: