[modeleng] Re: plastic pipe

From: "Jeff Dayman" <jeffdayman@xxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Mon, 24 Apr 2006 21:05:58 -0400

temp maybe  pressure no

----- Original Message ----- 
From: "Peter Sheppard" <puffernutter@xxxxxxxxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, April 24, 2006 11:09 AM
Subject: [modeleng] Re: plastic pipe


> Alan,
>
> A daft thought, but how abut the flexible pipe used in steam wallpaper
> strippers?  It will certainly handle the temperature.
>
> Cheers
>
> Peter
>
>
> On 23/04/2006 at 18:19 you wrote:
> >  Does anyone know of any plastic pipe that will withstand low pressure
> >  (around 25-30psi) steam.?
> >  That is a temperature of around 275F, and I would have thought that
> > may be
> >  within the range of some modern plastics.
> >
> >  Alan
> >
> >  MODEL ENGINEERING DISCUSSION LIST.
> >
> >  To UNSUBSCRIBE from this list, send a blank email to,
> >  modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> > subject line.
>
> --puffernutter
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

References:

[modeleng] Re: Lathe Bed Re- Grinding
From: tim martin

[modeleng] plastic pipe
From: alan stepney

[modeleng] Re: plastic pipe
From: Peter Sheppard

[modeleng] Re: plastic pipe

Other related posts: