[modeleng] RE: [modeleng] Re: [modeleng] RE: [modeleng] Re: [modeleng] 1HP, 24V DC electric motor on ebay for £1

I'm about 5 miles from the Dartford river crossing on the M25.  I don't =
have
ready access to a carrier but I can make enquiries.

I'm a bit tied up at the moment with a bit of emergency plumbing for my
sister.  It'll take a few days.

Regards
Andy

-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx =
[mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of Tony Wells
Sent: 20 August 2007 18:38
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: [modeleng] RE: [modeleng] Re: [modeleng] 1HP, =
24V DC
electric motor on ebay for =A31

Hello Andy,

Thank you for this, but with me living in Leeds, and London 200 miles =
away,=20
let alone wherever in Kent you are, it is a long and therefore an =
expensive=20
car journey, even with my diesel. Whereabouts are you exactly, and how =
far=20
from the motorway network please, so that I can work out how much the =
fuel=20
would cost and therefore how much monies would be left over for the =
actual=20
motor? Do you have access to a Carrier at all though, as I have seem =
similar

sized motors listed on ebay with around =A315 carrier charges?

Cheers,

Tony.


----- Original Message -----=20
From: "Andrew Houston" <andrew@xxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, August 20, 2007 5:39 PM
Subject: [modeleng] RE: [modeleng] Re: [modeleng] 1HP, 24V DC electric =
motor

on ebay for =A31


> Tony
>
> I've got a spare single-phase, 1.5kw (2hp) Brook-Hansen motor - size =
100 =3D
> -
> that I'm think of selling.  It's a bit too large to send by post and =
I'm =3D
> in
> Kent.
>
> What offers and how would you collect it ?
>
> Andy
>


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,=20
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the =
subject
line.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: