[modeleng] Re: drawing identity

John, I dont think so, but it is close.

The cylinders are 18.5 x 26" and the wheels, 4ft 7.25" dia.

Alan
----- Original Message ----- 
From: "John Pagett" <john_pagett@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, January 25, 2009 9:27 PM
Subject: [modeleng] Re: drawing identity


Alan,

Is this it?

http://www.lner.info/locos/J/j32.shtml

JohnP
----- Original Message ----- 
From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, January 25, 2009 5:48 PM
Subject: [modeleng] drawing identity


When taking some rubbish to my local tip yesterday, I spotted a drawing in
the pile of "interesting things" they keep there.
For the princely sum of 50 pence, I obtained the drawing of a Neilson Reid
locomotive in a rather tatty frame.
Having removed it from the frame,  I scanned it.

(Due to the size, it is in two parts.)

http://www.alanstepney.info/reid1.jpg
http://www.alanstepney.info/reid2.jpg

The only books I have dont give enough information on the company to
identify the engine.

Has anyone any idea of the date, and for whom it was built?

Alan

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.



--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.13/1914 - Release Date: 24/01/2009
20:40


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: