[modeleng] Re: coarse threads

My early gearbox ML7 can get down to a 2TPI thread if needs be, though
you'd have to mill it and turn the lathe over by hand, I can't imagine
trying to cut it under power.....
chrisc

-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx
[mailto:modeleng-bounce@xxxxxxxxxxxxx] On Behalf Of RICHARD GAYS
Sent: 25 January 2007 10:11
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: coarse threads

Alan,

    Does not the Quorn use a 1" TPI groove for rapid adjustment? You
might 
find your lathe in demand!

Dick Gays, Leicester, UK.
----- Original Message ----- 
From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, January 25, 2007 9:17 AM
Subject: [modeleng] coarse threads

________________________________________________________________________
This e-mail, and any attachment, is confidential. If you have received it in 
error, do not use or disclose the information in any way, notify me 
immediately, and please delete it from your system.
________________________________________________________________________
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: