[modeleng] coarse threads

From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Thu, 25 Jan 2007 09:17:21 -0000

I am restoring an old lathe.

The thread cutting chart attached to its lists threads down to 2 and 1tpi.
What on earth would use those?

Alan Stepney

http://www.alanstepney.info
Model Engineering & steam engine information pages

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Re: coarse threads
From: RICHARD GAYS

[modeleng] Re: coarse threads
From: Jeff Dayman

[modeleng] Re: coarse threads
From: Jesse Livingston

[modeleng] Re: coarse threads
From: Ken Strauss

[modeleng] Re: coarse threads
From: Jerry Kimberlin

[modeleng] Re: coarse threads
From: Allen Messer

[modeleng] Re: coarse threads
From: Dennis Jewitt

References:
- [modeleng] Re: Allen heads
  - From: Allen Messer
- [modeleng] Re: Allen heads
  - From: Dave Beaman

[modeleng] coarse threads

Other related posts: