[modeleng] Re: You can't keep a good chicken down!!!!!!

Still laughing at this end.
Best wishes
Don
----- Original Message ----- 
From: "Dave Beaman" <davebeaman@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, October 25, 2006 8:30 PM
Subject: [modeleng] Re: You can't keep a good chicken down!!!!!!



Sorry about sending this of topic guys, I hit the wrong button and sent it
to all on my addy list!!! It is funny though!



I had to laff at this one!!!



    > > > > > >Sometimes it DOES take a Rocket Scientist!! (true story)
    > > > > > >
    > > > > > >Scientists at Rolls Royce built a gun specifically to launch
dead
    > > > > > >chickens at the windshields of airliners and military jets
all
    > > > > > >travelling at maximum velocity. The idea is to simulate the
    >frequent incidents of collisions with airborne fowl to test the
strength of
    > > the windshields.
    > > > > > >
    > > > > > >American engineers heard about the gun and were eager to test
it on
    > > the windshields of their new high speed trains. Arrangements were
made,
    > > and a gun was sent to the American engineers.
    > > > > > >
    > > > > > >When the gun was fired, the engineers stood shocked as the
chicken
    > > > > > >hurled out of the barrel, crashed into the shatterproof
shield,
    > > smashed it to smithereens, blasted through the control console,
snapped the
    > > > > > >engineer's back-rest in two and embedded itself in the back
wall of
    > > the cabin like an arrow shot from a bow.
    > > > > > >
    > > > > > >The horrified Yanks sent Rolls Royce the disastrous results
of the
    > > > > > >experiment, along with the designs of the windshield and
begged the
    > > > > > >British scientists for suggestions.
    > > > > > >
    > > > > > >You're going to love this......
    > > > > > >
    > > > > > >Rolls Royce responded with a one-line memo:
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >
    > > > > > >"Defrost the chicken."




MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.




MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
line.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: