[modeleng] Re: Tinker tool

I believe that Tinker plans and castings are still available from Guy
Lautard. See http://lautard.com/tinker-s.htm


> -----Original Message-----
> From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
> On Behalf Of David Everett
> Sent: Saturday, June 23, 2007 4:54 PM
> To: modeleng@xxxxxxxxxxxxx
> Subject: [modeleng] Re: Tinker tool
> 
> If anyone wants one, I have a Hart tool grinding jig.  Perhaps not as
> sophisticated as the Tinker,
> but adequate for most ME requirements.
> 
> Regards
> 
> Dave
> 
> 
> > Hi to all,
> > Does anyone subscribe to Model Engineers workshop Mag,On the front of
> the latest Mag there is a
> > picture of a Tinker Tool,Does anyone know if the castings are still
> available or weather anyone
> > has one of these that could make some drawings so i can make one.
> >
> > yours John Burridge
> 
> 
>       ___________________________________________________________
> Yahoo! Mail is the world's favourite email. Don't settle for less, sign up
> for
> your free account today
> http://uk.rd.yahoo.com/evt=44106/*http://uk.docs.yahoo.com/mail/winter07.h
> tml
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: