[modeleng] Re: Tapers

Thanks Al for this info.   We will be in sunny climes until March, at which 
time I will dust off my maths!

Cheers!  Hubert

----- Original Message ----- 
From: "Allen Messer" <al_messer@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Saturday, January 10, 2009 6:22 PM
Subject: [modeleng] Re: Tapers


> Hubert
>
> Tangent of angle equals Taper per foot in inches divided by 24.  And 
> you'll need to consult the tangent tables in a machinery handbook.
>
> Al
>
>
> --- On Sat, 1/10/09, Shep <shep.28@xxxxxxxxxxxx> wrote:
>
>> From: Shep <shep.28@xxxxxxxxxxxx>
>> Subject: [modeleng] Tapers
>> To: "Modeleng" <modeleng@xxxxxxxxxxxxx>
>> Date: Saturday, January 10, 2009, 9:50 AM
>> Hello everyone
>> What is the formula needed to convert to degrees, the taper
>> given in inches per foot?
>>
>> Thanks, all of you mathematical gurus!
>>
>> Cheers!   Hubert
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word
>> "unsubscribe" in the subject line.
>
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: