[modeleng] Re: Steam loco configurations

Jesse

To avoid clogging up the recipient's system, I send each picture on a 
separate email - this seems to work, as I have had no complaints about 
system paralysis!

How are you in deepest slightly dampTennessee?

Cheers!   Hubert

----- Original Message ----- 
From: "Jesse Livingston" <fernj1@xxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Tuesday, August 28, 2007 11:08 PM
Subject: [modeleng] Re: Steam loco configurations


> Tony,
>
> I had already sent you the side elevation before I saw your request, but 
> as
> soon as I locate a bleeping tape measure, I will make the photos you need.
> Plan view will be difficult as I cannot get the camera high enough above 
> the
> locomotive to get it all in and there is no plan view in the prints that
> came with the casting set back in 1973.  I will see what I can do though.
> Maybe make several views along the length of the loco.  Front elevation is
> no problem since the loco is on a roll around stand.  Will not send all 
> pics
> at same time as I am using a large file size so you can get all the detail
> you will need.  Don't want to clog up your server.
>
> Jesse in slightly damper W. Tennessee (1 tenth of an inch)
>
> 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: