[modeleng] Re: Steam loco configurations

Tony,

I had already sent you the side elevation before I saw your request, but as 
soon as I locate a bleeping tape measure, I will make the photos you need. 
Plan view will be difficult as I cannot get the camera high enough above the 
locomotive to get it all in and there is no plan view in the prints that 
came with the casting set back in 1973.  I will see what I can do though. 
Maybe make several views along the length of the loco.  Front elevation is 
no problem since the loco is on a roll around stand.  Will not send all pics 
at same time as I am using a large file size so you can get all the detail 
you will need.  Don't want to clog up your server.

Jesse in slightly damper W. Tennessee (1 tenth of an inch)


 Can you send me three photos please Jesse - front elevation, side 
elevation,
 and plan - all still with the tape measure though. I should be able to pick
 off / scale off all the detail that I need then.

 Thanks,

 Tony.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: