[modeleng] Re: Static Phase Convertor Info

Don

Thanks for those kind words.  Excuse my delay in acknowledging them.

Andy

-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of Donkitson1@xxxxxxx
Sent: 10 May 2006 22:30
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Static Phase Convertor Info

Hi Andy.
     I would just like to congratulate you on a  very comprehensive 
description of Static Phase Conversion. I am sure that many  of the listees
and others 
will find your info extremely useful.
    I completed a Static Phase Convertor about three  years, but after a 
short time I converted it into a Rotary Phase Convertor and  it has been
very 
satisfactory. If I were to do it all again I would go down the  inverter
route as 
the benefits are much greater with ease of speed control etc  and as you say

the prices of them on Ebay now are generally quite  realistic.
Best wishes
Don.
 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: