[modeleng] Re: Split pins

Small Parts and Bearings list 'em from 1mm to 6.3mm in stainless steel - no
brass tho'

http://www.smallparts.com.au/cgi-bin/store/datafill.pl?product=Pins-Cotter-S
tainlessSteel&firstitem=1&mc=SplitPins&Step=3=post

> The reason for making them is (a) the size wanted isnt a standard one, and
> (b) they will need to be in brass.
>
> Someone has asked me if I can / would make around 100 of them, and before
> saying yes (and earning some cash)
> I am just thinking of the best way to make them.
>
> Alan
>
> ----- Original Message -----
> From: "SPAM" <spam99@xxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Saturday, February 16, 2008 4:34 PM
> Subject: [modeleng] Re: Split pins
>
>
> If by "split pins" you mean what are called "cotter pins" in NA then they
> are formed from half-round stock. I suppose that you could shape the stock
> with a belt sander or perhaps wrap the wire around a large mandrel and
turn
> to make the flat side.
>
> I hate to ask but since commercial ones cost pennies each why do you want
to
> make them? Do you need them of stainless or...?
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: