[modeleng] Re: Silver Solder for Stainless

Harry,
If you look at J-M Metal joining, http://www.jm-metaljoining.com/
and look through the questions, you will find:
http://www.jm-metaljoining.com/technical-pages.asp?parentid=5&sectionid=1#10
where they suggest some products suitable in colour (or color) for 
stainless.
Alan

----- Original Message ----- 
From: "Harry Wade" <hww@xxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, February 25, 2009 7:23 PM
Subject: [modeleng] Re: Silver Solder for Stainless


-----Original Message-----
>From: Jerry Kimberlin <kimberln@xxxxxxxxxxx>
>that yellowish cast is due to cadmium, most likely.

Jerry (and all),
Almost all of what I have is non-cad Harris Safety-Silv 45 (45%) but this 
still is a ways from a match.  However I think I have a bit of 55% non-cad 
as well and I should give that a try.  I wonder if I can Xref the Cupalloy 
449/BS EN1044 AG502 to a US equivalent?

>Also, Handy and Harmon's brazing book is a good place to look for silver 
>solder data.  Trouble is, I don't know where
>or how to get some of the types advertised.

That's always a problem as I literally don't need but a few inches of wire.
Regards,
Harry

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: