In a message dated 21/07/2006 16:25:03 GMT Daylight Time,
puffernutter@xxxxxxxxxxxxxxxxxxxxxxx writes:
Well I have one spare wheel on the rear door and one on the bonnet!
Well it is a LR 110 county!
Peter
(Enforced layover in Hong Kong - plane problems. So I am in a hotel for
the night. 23:23 here!
On Friday, 21 July 2006 13:19, Barrie Purslow wrote:
> Hi Ron,
>
> Thanks for the thought but the passengers seat has to wound fully
> forward
> then the seat back has to be tilted fully forward by which time there
> is no
> room for the spare wheel which is, surprisingly these days a full-size
> wheel.(Peugeot 406 Estate).
>
> Cheers,
>
>
> Barrie
>
>
> ----- Original Message -----
> From: "Ron Head" <ron.head@xxxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Thursday, July 20, 2006 8:11 PM
> Subject: [modeleng] Re: Securing models
>
>
>> Hi Barrie
>>
>> As you aren't carrying a passenger, why not put the spare wheel in the
>> passenger seat? If it's a space-saver wheel, it shouldn't take up too
>> much
>> room.
>>
>> Regards
>> Ron
>>
>> ----- Original Message -----
>> From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
>> To: <modeleng@xxxxxxxxxxxxx>
>> Sent: Tuesday, July 18, 2006 10:37 PM
>> Subject: [modeleng] Re: Securing models
>>
>>
>>> Incidentally it has only recently occured to me that one of the
>>> problems
>>> with this board set up is the difficulty of removing the spare wheel
>>> (located under the floor, under the board) in the event of a
>>> puncture. I
>>> certainly couldn't do it single handedly and I'm not sure what the
>>> reaction
>>> of the "friendly" A.A. man would be when asked to lift 400lbs worth of
>>> board
>>> plus loco!
>>>
>>> Barrie Purslow
>>> Warrington UK
>>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
>> subject
>> line.
>>
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.394 / Virus Database: 268.10.1/390 - Release Date:
>> 17/07/2006
>>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> subject line.
Sent from my Sidekick.
Please cc to peter@xxxxxxxxxxxxxxxxxxx
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
Peter ,
Have a safe and speedy journey back
Don
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.