[modeleng] Re: Securing models

Well I have one spare wheel on the rear door and one on the bonnet!  
Well it is a LR 110 county!

Peter
(Enforced layover in Hong Kong - plane problems. So I am in a hotel for 
the night.  23:23 here!


On Friday, 21 July 2006 13:19, Barrie Purslow wrote:
> Hi Ron,
>
> Thanks for the thought but the passengers seat has to wound fully 
> forward
> then the seat back has to be tilted fully forward by which time there 
> is no
> room for the spare wheel which is, surprisingly these days a full-size
> wheel.(Peugeot 406 Estate).
>
> Cheers,
>
>
> Barrie
>
>
> ----- Original Message -----
> From: "Ron Head" <ron.head@xxxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Thursday, July 20, 2006 8:11 PM
> Subject: [modeleng] Re: Securing models
>
>
>>  Hi Barrie
>>
>>  As you aren't carrying a passenger, why not put the spare wheel in the
>>  passenger seat?  If it's a space-saver wheel, it shouldn't take up too
>>  much
>>  room.
>>
>>  Regards
>>  Ron
>>
>>  ----- Original Message -----
>>  From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
>>  To: <modeleng@xxxxxxxxxxxxx>
>>  Sent: Tuesday, July 18, 2006 10:37 PM
>>  Subject: [modeleng] Re: Securing models
>>
>>
>>>  Incidentally it has only recently occured to me that one of the 
>>> problems
>>>  with this board set up is the difficulty of removing the spare wheel
>>>  (located under the floor, under the board) in the event of a 
>>> puncture. I
>>>  certainly couldn't do it single handedly and I'm not sure what the
>>>  reaction
>>>  of the "friendly" A.A. man would be when asked to lift 400lbs worth of
>>>  board
>>>  plus loco!
>>>
>>>  Barrie Purslow
>>>  Warrington UK
>>>
>>  MODEL ENGINEERING DISCUSSION LIST.
>>
>>  To UNSUBSCRIBE from this list, send a blank email to,
>>  modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the 
>> subject
>>  line.
>>
>>
>>
>>  --
>>  No virus found in this incoming message.
>>  Checked by AVG Free Edition.
>>  Version: 7.1.394 / Virus Database: 268.10.1/390 - Release Date: 
>> 17/07/2006
>>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the 
> subject line.
Sent from my Sidekick.
Please cc to peter@xxxxxxxxxxxxxxxxxxx
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: