[modeleng] Re: Question from Myke

Myke

I saw the number and the second part is wrong, it should be 6 not 5 numbers.
Try putting an 8 in front of the 71200.  I know that for part of the 01753
exchange many numbers were lengthened with an 8 many years ago.

Peter

----- Original Message ----- 
From: "Myke Baigent" <MykeBaigent@xxxxxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Thursday, July 29, 2004 9:13 AM
Subject: [modeleng] Re: Question from Myke


Alan,
Thanks for the info, I managed to contact Ondeo-Nalco, who were very
helpful.
But could you please re-check the phone number that you gave me for Aquazar.
I tried phoning them unsuccessfully, and directory inquiries could not help.
Best regards,
Myke


-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
On Behalf Of alanjstepney
Sent: 29 July 2004 02:49
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: Question from Myke

Myke,
I looked back through the archives, and this is what I found.

1).

DM 4 in1concentrate is good stuff! Its made by a firm called Aquazar and
their based in Berkshire and tel number is 0175371200



2).
From my experience with smaller boilers,  Heatreat 502 is the best option.
However I do not know where we can obtain this in say 25 litre plus
quantities although I do know Model engineering suppliers that can supply by
the half or full litre
Available from: Ondeo Nalco, Winnington Avenue, Northwich, Cheshire, CW8 4DX
tel: 01606 74488



alan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

www.alanstepney.info
Model Engineering, Steam Engine, and Railway technical pages.


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: