[modeleng] Re: Queensland Rail Railbus/Railcar

Peter,
Try emailing the ARHS in Qld re plans and more photos. They might have 
some ideas. You certainly will be no worse off  than you are now. Also, 
you might try some of the HO modelling groups in Oz via some judicious 
Internet surfing and following links etc, they often have plans for all 
sorts of things.
David

The Sheppard Residence wrote:
> David,
>
> Spot on, it looks like it is "Red Fred" on the tie pin.
>
> Many thanks.
>
> Now the search starts in earnest!
>
> Cheers
>
> Peter
>
> David Archibald wrote:
>   
>> Try looking at http://community.webshots.com/album/91477934tSksQr for 
>> photos of the Gulflander
>> or at http://www.arhs-qld.org.au/ in the Gallery | Rail motors | 
>> Pre-1800 class
>>
>> David Archibald
>> Sydney
>>
>>
>> The Sheppard Residence wrote:
>>
>>     
>>> All,
>>>
>>> I am looking for some help (again) this may come primarily from our 
>>> friends in the Antipodes, but any contribution will be welcome.
>>>
>>> I have been looking for a while for my next project (after I've finished 
>>> Topsy and the De Winton!) and I have a 10HP electric start Honda engine 
>>> to use.  (Whether it is petrol electric or petrol hydraulic I have yet 
>>> to decide, but I have the bits to do either).
>>>
>>> I want something big and I want it to be "sit in".
>>>
>>> So I have come up with a model of a Queensland Rail Railbus/Railcar.
>>>
>>> The only picture I have is on a tie pin I bought from the Queensland 
>>> Rail Shop in Brisbane shortly before it closed.  It is a "bus" type body 
>>> with a bonnet, a bogie under the front and a single axle to the rear. 
>>> It is pulling a bogie coach with a similar general style.
>>>
>>> Does that ring bells with anybody, are there any pictures or drawings 
>>> available, any other models??
>>>
>>> Looking forward to the responses.
>>>
>>> Cheers
>>>
>>> Peter
>>>
>>>
>>> MODEL ENGINEERING DISCUSSION LIST.
>>>
>>> To UNSUBSCRIBE from this list, send a blank email to, 
>>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>>> line.
>>>
>>>  
>>>       
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to, 
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>> line.
>>
>>
>>
>>     
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
>   


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: