[modeleng] Re: Pins-striping tool

Clif

> Hi All,
> It always annoys me when I see the Bob Moore lining pen as it is only a type 
> of drawing pen for
> indian ink that I used when I was a draughtsman.
> I just wish that I had thought of it first.
> Originaly spring bows were used, then came the Uno pen in the late sixties 
> (which is now the Bob
> Moore) then the modern drawing pen. The interesting thing is where does he 
> get them made now ?
> As the only essential bit is a very fine steel tube, is there any possibility 
> of using
> hyperdermic needles suitably cut down with a cup on the top and given a 
> polished end.
> 
> Regards 
> Clif
> Feeling very unhappy at the moment as I have just had a Hip replacement 
> operation.


Now that you have got your rant off your chest, I hope you feel better now!

Thanks for your comments.

Dave
The Emerald Isle
 
> 
> -----Original Message-----
> From: David Everett <deverett2003@xxxxxxxxxxx>
> To: modeleng@xxxxxxxxxxxxx
> Sent: Fri, 22 Feb 2008 7:33
> Subject: [modeleng] Pins-striping tool
> 
> 
> 
> What does the team use for pinstriping/lining out models?
> 
> In the UK there is the Bob Moore Lining Pen at an exorbitant cost.
> In the US there is the Beugler Pin Striper at an exorbitant cost.
> 
> Does anyone use the Master Striper and if Yes, what is the verdict?  It would 
> appear to work on
> the same principle as the Beugler but looks much more affordable.
> 
> http://www.misterart.com/store/view/001/group_id/2841/Master-Single-Line-Striper-Set.htm
>   
> 
> 
> Regards
> 
> Dave
> The Emerald Isle
> 
> 
>       ___________________________________________________________ 
> Rise to the challenge for Sport Relief with Yahoo! For Good  
> 
> http://uk.promotions.yahoo.com/forgood/
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
> 
> 
> 
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
> 



      __________________________________________________________
Sent from Yahoo! Mail.
A Smarter Inbox. http://uk.docs.yahoo.com/nowyoucan.html
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: