[modeleng] Re: Pins-striping tool

Thanks for the contact, Dave.  It so happens I need an etched engine makers 
plate as well!

Dave
The Emerald Isle



--- Dave Beaman  wrote:

> I have a Bob Moore lining pen for my smaller painting, anything up to gauge 
> one so far. I do however have a pet lining engineer who is superb. Sadly, he 
> won't be doing much more in the way of lining but his etch brass number 
> plates and name plates are excellent.
> 
> Bill Hall (Loco and Wagon Numberplates, Builders, pockets and label clips 
> etc  Tel 01600 719600)
> 
> He might be able to give you some tips for the price of a phone call.
> 
> Dave.
> 
> 
> ----- Original Message ----- 
> From: "David Everett" <deverett2003@xxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Friday, February 22, 2008 7:33 AM
> Subject: [modeleng] Pins-striping tool
> 
> 
> > What does the team use for pinstriping/lining out models?
> >
> > In the UK there is the Bob Moore Lining Pen at an exorbitant cost.
> > In the US there is the Beugler Pin Striper at an exorbitant cost.
> >
> > Does anyone use the Master Striper and if Yes, what is the verdict?  It 
> > would appear to work on
> > the same principle as the Beugler but looks much more affordable.
> >
> > http://www.misterart.com/store/view/001/group_id/2841/Master-Single-Line-Striper-Set.htm
> >
> > Regards
> >
> > Dave
> > The Emerald Isle
> >
> >
> >      ___________________________________________________________
> > Rise to the challenge for Sport Relief with Yahoo! For Good
> >
> > http://uk.promotions.yahoo.com/forgood/
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email to,
> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> > line. 
> 
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
> 



      __________________________________________________________
Sent from Yahoo! Mail.
A Smarter Inbox. http://uk.docs.yahoo.com/nowyoucan.html
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: