[modeleng] Re: Pins-striping tool

Oh Yeah Clif, get yourself up and about asap, I got a few older friends that 
have had knee and hip replacements, all were up and about within days and 
expected to be so too!!! Hard ward Sisters here! Get well soon mate.

Dave
>
>>From: clif.gwr@xxxxxxxxxxxx
>>Reply-To: modeleng@xxxxxxxxxxxxx
>>To: modeleng@xxxxxxxxxxxxx
>>Subject: [modeleng] Re: Pins-striping tool
>>Date: Fri, 22 Feb 2008 05:26:44 -0500
>>
>>Hi All,
>>It always annoys me when I see the Bob Moore lining pen as it is only a
>>type of drawing pen for indian ink that I used when I was a draughtsman.
>>I just wish that I had thought of it first.
>>Originaly spring bows were used, then came the Uno pen in the late sixties
>>(which is now the Bob Moore) then the modern drawing pen. The interesting
>>thing is where does he get them made now ?
>>As the only essential bit is a very fine steel tube, is there any
>>possibility of using hyperdermic needles suitably cut down with a cup on
>>the top and given a polished end.
>>
>>Regards
>>Clif
>>Feeling very unhappy at the moment as I have just had a Hip replacement
>>operation.
>>
>>
>>-----Original Message-----
>>From: David Everett <deverett2003@xxxxxxxxxxx>
>>To: modeleng@xxxxxxxxxxxxx
>>Sent: Fri, 22 Feb 2008 7:33
>>Subject: [modeleng] Pins-striping tool
>>
>>
>>
>>What does the team use for pinstriping/lining out models?
>>
>>In the UK there is the Bob Moore Lining Pen at an exorbitant cost.
>>In the US there is the Beugler Pin Striper at an exorbitant cost.
>>
>>Does anyone use the Master Striper and if Yes, what is the verdict?  It
>>would
>>appear to work on
>>the same principle as the Beugler but looks much more affordable.
>>
>>http://www.misterart.com/store/view/001/group_id/2841/Master-Single-Line-Striper-Set.htm
>>
>>
>>Regards
>>
>>Dave
>>The Emerald Isle
>>
>>
>>       ___________________________________________________________
>>Rise to the challenge for Sport Relief with Yahoo! For Good
>>
>>http://uk.promotions.yahoo.com/forgood/
>>MODEL ENGINEERING DISCUSSION LIST.
>>
>>To UNSUBSCRIBE from this list, send a blank email to,
>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>>line.
>>
>>
>>
>>MODEL ENGINEERING DISCUSSION LIST.
>>
>>To UNSUBSCRIBE from this list, send a blank email to,
>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>>line.
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: