[modeleng] Parting off--rest of the story
- From: Allen Messer <al_messer@xxxxxxxxx>
- To: modeleng <modeleng@xxxxxxxxxxxxx>
- Date: Mon, 5 Jan 2009 15:43:19 -0800 (PST)
Well, I did it!! I set the spindle speed at 30 rpm, with a feed of 0.0092 per
rev, lots of cutting oil, and it worked--part parted off smoothly with no
jam-ups. Of course, I almost wet my pants while the machine was doing its
thing-----! Many thanks for all the good advice. I don't know what I would do
without youse guys!!
Al Messer
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
- » [modeleng] Parting off--rest of the story - Allen Messer
