Allen Messer wrote: > I am on the East coast, also building in 7-1/2" gauge. > Question: did you draw up your own plans or are they > available on the market? Allen, I did not draw up my own plans. There are lots of books with the construction details in them. However, I do have a drawn set of plans I got from somewhere so they exist on the market, or did. The plans I have for the wooden frame wagon are by A. J. R. Dando and are labeled W001. They are in 7 1/4" gauge, but that can easily be widened to 7 1/2" without worry. I have no idea where I got the plans since they came along with a lot of paperwork when I bought an unfinished 7 1/2" Schools locomotive about 15 years ago. I obtained the wheel castings from Reeves a long time ago before they were reorganized. It could be that the plans came from Reeves also, but I have no way of knowing. The plans I have are fairly ragged and have been cut and pasted into several smaller sheets. All the various parts are there but the plans are sure a bit difficult to read. Is there anything I can do to help you out? JerryK MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.