[modeleng] Re: Oz only Digital Caliper's O/T DRO

Very similar Al. Since I made the new feed screw & ball crank for the
'Clunker' I've got that one on hand. Need 3 t5o set the mill up properly
tho' - beats paying $700 - $800 for a proper DRO

----- Original Message -----
From: "Allen Messer" <al_messer@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Sunday, May 21, 2006 8:15 AM
Subject: [modeleng] Re: Oz only Digital Caliper's O/T DRO


> TEL, is this what you used to make your DRO?
>
> Al Messer
>
> --- alan stepney <alan@xxxxxxxxxxxxxxxx> wrote:
>
> > They have had them, a couple of times.
> > I bought one (under £10) and it works well and seems
> > to be reliable.
> >
> > The one thing it doesnt have is any battery save
> > facility, so one has to
> > rememebr to turn it off after use.
> >
> > Alan
> >
> > ----- Original Message -----
> > From: "steve crees" <stevecrees@xxxxxxxxxxx>
> >
> >
> > Aldi stores are here in the UK too but no calipers
> > here though :-(
> >   Steve C
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email
> > to,
> > modeleng-request@xxxxxxxxxxxxx with the word
> > "unsubscribe" in the subject line.
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: