[modeleng] Re: Nitrile Balls

Have had the same trouble Clif, I have gone back to using Stainless/ Just 
wish I could get my regulator to cloase properly.

Dave.


----- Original Message ----- 
From: "Clif Walker" <clif.gwr@xxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, March 16, 2009 10:42 AM
Subject: [modeleng] Re: Nitrile Balls


> Hi Pete and All,
>
>
> I stopped using Nitrile for this very reason as I found with any decent
> pressure they deformed and went into the pipe.
>
> Clif
> ----- Original Message ----- 
> From: "The Sheppard Residence" <psbr20252@xxxxxxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Sunday, March 15, 2009 11:52 PM
> Subject: [modeleng] Nitrile Balls
>
>
>> All,
>>
>> On a couple of occasions recently I have had injectors fail, only to
>> find that when I dismantle the clack the nitrile ball is firmly wedged
>> in the seat.
>>
>> Now this size of nitrile ball has worked successfully for years
>> previously, so size isn't an issue!
>>
>> Has anyone else had this problem?  Should nitrile balls be changed on a
>> regular basis?
>>
>> Cheers
>>
>> Peter
>> Tinkerbell
>> Bagnall x 2
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>> line.
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.0.237 / Virus Database: 270.11.13/2001 - Release Date: 03/14/09
> 06:54:00
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: