[modeleng] New Loco project

From: Harry Wade <hww@xxxxxxxx>
To: modeleng@xxxxxxxxxxxxx
Date: Wed, 28 Mar 2007 16:21:08 -0600

Gents,
     Startup on this will be some ways down the road but I have just
acquired a partial set of castings and the drawings for a 3.5"ga GNR
Stirling Single #1.  The castings are by Dave Goodwin and the drawings by
Locomotive Design Company.
    The wheel castings are a bit on the rough side but the balance are lost
wax castings.  The drawings are nicely done but proofing of the design and
castings is always a question and unknown, but I will assume the best.
    I wondered if anyone knew of a built and running example of this loco?


Regards,
Harry Wade
Nashville  Tennessee

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Welding loco frames to buffer beams (Rob Roy)
From: R.L. Roebuck

References:
- [modeleng] Re: voltage controll
  - From: Chris Crosskey
- [modeleng] voltage controll
  - From: Patrick Coppens- Marian Lynch
- [modeleng] Re: voltage controll
  - From: Patrick Coppens- Marian Lynch

[modeleng] New Loco project

Other related posts: