[modeleng] Re: Model pressure gauges

Cute little bugger, though!

Al
--- TEL <tel47@xxxxxxxxxxx> wrote:

> I bought one of these
>
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&rd=1&item=360014977307&ssPa
> geName=STRK:MEWA:IT&ih=023
> a week or two back - it has the same problem
> 
> > Hi all
> >
> > Has anyone bought a model pressure gauge recently?
>  A friend of mine
> > recently bought one from Maidstone Engineering
> (now part of Maxitrak) and
> > was surprised to find that instead of the bezel
> being held on with a
> couple
> > of 10BA screws, it was firmly stuck on.  He asked
> the supplier how he was
> > supposed to get the glass out to paint the red
> line on the dial.
> >
> > In reply, he received a letter from the proprietor
> of Maxitrak, saying
> that
> > the glass couldn't be removed, and that he would
> have to paint the red
> line
> > on the glass.
> >
> > I DON'T THINK SO!
> >
> > This is totally unsatisfactory, as the red line
> could easily be rubbed off
> > when cleaning.  Has anyone else had this problem,
> and are other suppliers'
> > gauges the same?  The aforesaid gentleman at
> Maxitrak stated that all
> gauges
> > come from the same source, regardless of retailer,
> but I somehow doubt
> this.
> >
> > Regards
> > Ron
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email
> to,
> > modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject
> line
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> 
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email
> to, 
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
> 



      
____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: