[modeleng] Re: Mill info, was I might get into trouble.

Thanks for the warning about the weight being at the top Keith, as that 
rules me out unfortunately. Ah well, back to the Dolls' House Furniture I 
suppose ...

Tony.


----- Original Message ----- 
From: <Gmx22@xxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Tuesday, September 12, 2006 7:15 PM
Subject: [modeleng] Mill info, was I might get into trouble.


> Ok this is info on mill, I bought it second hand , make APTC well  that's
> what is on the side of it. Table size 23" x 7.5" . Table travel 6" x 15" 
> Nose to
> table height 14.25". I was looking for £400
> 12 speed belt drive No 3 MT sorry only tooling with it is 1/2 chuck all
> other tooling i need for new machine. total height of mill is 40" and the 
> stand
> is 31" Oh its 240 volt, (I wish I had 415) Its in quite goon nick with no 
> real
> marks on the table but in no way is it a new bit of kit. Anyway if anyone
> interested I will email pics, don't want to waste your time on something 
> that
> not any good to you. Tony yes it will come apart but the weight is at the 
> top
> so  god knows how you would get it back together. I have an engine crane 
> so can
> move  it about. when I collected it I used a small trailer.
> As with all toys I could not wait to use it but after hours of looking,
> thinking and 20 cups of tea went and bought a small engine crane, which i 
> might
> add has come in handy on numerous occasions. If you want more info I will 
> email
> you and can have chat on phone
> Keith
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
> 


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: