[modeleng] Mill info, was I might get into trouble.

Ok this is info on mill, I bought it second hand , make APTC well  that's 
what is on the side of it. Table size 23" x 7.5" . Table travel 6" x 15"  Nose 
to 
table height 14.25". I was looking for £400
12 speed belt drive No 3 MT sorry only tooling with it is 1/2 chuck all  
other tooling i need for new machine. total height of mill is 40" and the stand 
 
is 31" Oh its 240 volt, (I wish I had 415) Its in quite goon nick with no real  
marks on the table but in no way is it a new bit of kit. Anyway if anyone  
interested I will email pics, don't want to waste your time on something that  
not any good to you. Tony yes it will come apart but the weight is at the top 
so  god knows how you would get it back together. I have an engine crane so can 
move  it about. when I collected it I used a small trailer.
As with all toys I could not wait to use it but after hours of looking,  
thinking and 20 cups of tea went and bought a small engine crane, which i might 
 
add has come in handy on numerous occasions. If you want more info I will email 
 you and can have chat on phone 
Keith
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: