[modeleng] Re: Midland Model Engineering Exhibiton

And having bought a few items, I got a 5% discount card from them.

JohnP
----- Original Message ----- 
From: "TEL" <tel@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Wednesday, October 18, 2006 9:02 PM
Subject: [modeleng] Re: Midland Model Engineering Exhibiton


I'll third the motion - good service, even to way over 'ere.




> I agree with Hubert, I too have been more than satisfied with RGD.
>
> Eric Walker
> ----- Original Message -----
> From: "Shep" <shep.28@xxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Wednesday, October 18, 2006 6:57 PM
> Subject: [modeleng] Re: Midland Model Engineering Exhibiton
>
>
> > My information about RDG is that their Myford equipment (gears etc) are
> > first class.   In fact, I was looking at them at their stand this
> > afternoon,
> > and they looked great - and are a fraction of the cost of the 'real'
> > parts!
> >
> > Hope that this helps.
> >
> > Cheers!   Hubert
> >
> > ----- Original Message -----
> > From: "Ken Strauss" <ken.strauss@xxxxxxxxxxxx>
> > To: <modeleng@xxxxxxxxxxxxx>
> > Sent: Wednesday, October 18, 2006 6:33 PM
> > Subject: [modeleng] Re: Midland Model Engineering Exhibiton
> >
> >
> >> Sorry. I am on the wrong side of the pond (Toronto, Canada) to help.
> >>
> >> To ask another supplier question: I recently bought a used Myford
Super7.
> >> Any suggestions regarding where to purchase accessories? What is the
> > quality
> >> of RDG Tool products? Any other suggestions? I need a fixed steady and
> >> the
> >> metric conversion set (Myford 1481/1), a couple of blank back plates to
> >> mount chucks and an ER-32 nut.
> >> > -----Original Message-----
> >> > From: modeleng-bounce@xxxxxxxxxxxxx
> > [mailto:modeleng-bounce@xxxxxxxxxxxxx]
> >> > On Behalf Of Shep
> >> > Sent: Wednesday, October 18, 2006 1:08 PM
> >> > To: modeleng@xxxxxxxxxxxxx
> >> > Subject: [modeleng] Re: Midland Model Engineering Exhibiton
> >> >
> >> > Hi Ken
> >> >
> >> > Thanks for this most interesting information.   Do you, (or any other
> >> > members of our List) know of any UK suppliers of Bison endmill
holders?
> >> >
> >> > Cheers!   Hubert
> >> >
> >> > ----- Original Message -----
> >> > From: "Ken Strauss" <ken.strauss@xxxxxxxxxxxx>
> >> > To: <modeleng@xxxxxxxxxxxxx>
> >> > Sent: Wednesday, October 18, 2006 5:54 PM
> >> > Subject: [modeleng] Re: Midland Model Engineering Exhibiton
> >> >
> >> >
> >> > > I don't know if they are available in your area but Bison (Poland)
> >> > > has
> >> > well
> >> > > finished and reasonably priced R8 endmill holders for cutters up to
> >> > 1.5".
> >> > >
> >> > > > -----Original Message-----
> >> > > > From: modeleng-bounce@xxxxxxxxxxxxx
> >> > [mailto:modeleng-bounce@xxxxxxxxxxxxx]
> >> > > > On Behalf Of Shep
> >> > > > Sent: Wednesday, October 18, 2006 12:27 PM
> >> > > > To: Modeleng
> >> > > > Subject: [modeleng] Midland Model Engineering Exhibiton
> >> > > >
> >> > > > I visited this Exhibition today - the last day of the show.
This
> >> > proved
> >> > > > to be a wise decision, as it was relatively uncrowded, and we did
> > not
> >> > have
> >> > > > to fight to get to counters or exhibits, or to get some food
> >> > > > (which,
> >> > by
> >> > > > the way, was excellent and good value!)
> >> > > > The quality of the models was, as ever, quite stunning - it makes
> > one
> >> > feel
> >> > > > quite humble to see this superb workmanship!
> >> > > >
> >> > > > I made one great find!   For years we have been able to get MT
> > arbours
> >> > > > with soft plain cylindrical ends - but not in R8.   I discovered
> > some
> >> > R8
> >> > > > arbours with generous soft 2" diameter cylindrical ends, amongst
> >> > > > the
> >> > stuff
> >> > > > on the Kirjeng ME Services stand (Phone: (01509) 672025.   These
> >> > > > are
> >> > at
> >> > > > last the answer to holding endmills bigger than 3/4" in R8
> >> > > > machines.
> >> > I
> >> > > > will simply bore them to the required size and secure with an
Allen
> >> > grub
> >> > > > screw on the side.
> >> > > >
> >> > > > Cheers!   Hubert
> >> > > >
> >> > > > MODEL ENGINEERING DISCUSSION LIST.
> >> > > >
> >> > > > To UNSUBSCRIBE from this list, send a blank email to,
> >> > > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> >> > subject
> >> > > > line.
> >> > >
> >> > > MODEL ENGINEERING DISCUSSION LIST.
> >> > >
> >> > > To UNSUBSCRIBE from this list, send a blank email to,
> >> > > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> >> > subject
> >> > line.
> >> >
> >> > MODEL ENGINEERING DISCUSSION LIST.
> >> >
> >> > To UNSUBSCRIBE from this list, send a blank email to,
> >> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
> > subject
> >> > line.
> >>
> >> MODEL ENGINEERING DISCUSSION LIST.
> >>
> >> To UNSUBSCRIBE from this list, send a blank email to,
> >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> > line.
> >
> > MODEL ENGINEERING DISCUSSION LIST.
> >
> > To UNSUBSCRIBE from this list, send a blank email to,
> > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject
> > line.
> >
> >
>
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
line.



-- 
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.0.408 / Virus Database: 268.13.5/483 - Release Date: 18/10/2006


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: