[modeleng] Re: Midland Exhibiton

From: "Chris Crosskey" <chris.crosskey@xxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Mon, 23 Oct 2006 08:38:12 +0100

With regard to the Beam engine, love the way the column is made with the
arches and all but does it actually run, I can't see any linkage for
either piston or crank or a pivot for the beam, I thought  all beam
engines had to have one or other of them unless the cylinder pivots?
chrisc

-----Original Message-----
From: modeleng-bounce@xxxxxxxxxxxxx
[mailto:modeleng-bounce@xxxxxxxxxxxxx] On Behalf Of alan stepney
Sent: 21 October 2006 21:24
To: modeleng@xxxxxxxxxxxxx
Subject: [modeleng] Re: Midland Exhibiton

John Walford (of the Guild of Model Wheelrights) sent me some pictures
of 
the exhibition.

These are:

http://www.alanstepney.info/Locomotion.jpg

http://www.alanstepney.info/Lancaster.jpg

http://www.alanstepney.info/Gresley.jpg

http://www.alanstepney.info/Caravan.jpg

http://www.alanstepney.info/Beam.jpg

http://www.alanstepney.info/American.jpg

http://www.alanstepney.info/8%20column.jpg

http://www.alanstepney.info/8 column.jpg

Alan Stepney

http://www.alanstepney.info
Model Engineering & steam engine information pages 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the
subject line.

________________________________________________________________________
This e-mail, and any attachment, is confidential. If you have received it in 
error, do not use or disclose the information in any way, notify me 
immediately, and please delete it from your system.
________________________________________________________________________
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

References:

[modeleng] Re: Midland Exhibiton
From: alan stepney

[modeleng] Re: Midland Exhibiton

Other related posts: