[modeleng] Re: Lead Screw

John, I have an odd-bod feed screw here (ex eBay) that might or might not be
suitable - if you can give me the all the dimensions on the one you are
lookin' for I'll run over it.

----- Original Message -----
From: "John Buckley" <jbuckley@xxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Friday, October 27, 2006 4:31 AM
Subject: [modeleng] Lead Screw


> Morning All,
>
> I am trying to source a cross slide lead screw for a Sheraton Conquest
> lathe.
>
> It has powered cross feed which means the lead screw has a gear on it
which
> is integral to the thread.  the only way I can see to fix the proplem of
> wear is to obtain a length of  11mm diam x 2mm LH pitch screwed ? acme rod
> and adapt it to the current lead screw.
>
> Does anyone know of a genuine leadscrew lying around the place or where I
> can get a lead screw.
>
> I have Googled and it would appear that the    11 mm x 2 mm is not a std
> size.
>
> Cheers,
> John
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: