[modeleng] Re: Larger Matters - epoxy glue

Thanks Tony!

How are you?

Cheers!   Hubert


----- Original Message ----- 
From: "Tony Wells" <oaksfield@xxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Saturday, February 17, 2007 8:06 PM
Subject: [modeleng] Re: Larger Matters - epoxy glue


> Yes it is Hubert, as even my little local DIY shop stocks it! Araldite do
> their own version of it as well though - "stronger than Steel" no less 
> !!! -
> in case you cannot find any.
>
> Tony wells.
>
>
> ----- Original Message ----- 
> From: "Shep" <shep.28@xxxxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Saturday, February 17, 2007 6:58 PM
> Subject: [modeleng] Re: Larger Matters - epoxy glue
>
>
>> Hi John
>>
>> Is JB Weld aavilable in the UK?
>>
>> Cheers!      Hubert
>>
>>
>>
>> ----- Original Message ----- 
>> From: "John Buckley" <jbuckley@xxxxxxxxxxxxxxxxx>
>> To: <modeleng@xxxxxxxxxxxxx>
>> Sent: Saturday, February 17, 2007 3:48 PM
>> Subject: [modeleng] Re: Larger Matters - epoxy glue
>>
>>
>>> Harry,
>>>
>>> The JB Weld is goof for high temps. I would have to go and have a look 
>>> at
>>> the sopec's for you but the temps refered to are in excess of stem loco
>>> temps.
>>>
>>> The sale spitch states that the tubes are good for 20 yrs but I haven't
>>> had
>>> a prt used set for that long. Mne tend  to get all used up over a a few
>>> months.
>>>
>>> John
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: