[modeleng] Re: Larger Matters

I have tried using a species of Loctite 638. It didn't work. I currently use 
Loctite 326 for many jobs where flat surfaces need to be secured together. I 
find it very good indeed and I use it where possible. Based on my experience 
I'd expect 326 to work but I don't know. Unfortunately it is expensive.

>From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
>Reply-To: modeleng@xxxxxxxxxxxxx
>To: <modeleng@xxxxxxxxxxxxx>
>Subject: [modeleng] Re: Larger Matters
>Date: Fri, 16 Feb 2007 22:57:06 -0000
>... I'm not
>sure that any glue would be up to the job. Have you tried this technique?
>
>Cheers,
>
>
>Barrie
>
>
...
> > ----- Original Message -----
> > From: "John Buckley" <jbuckley@xxxxxxxxxxxxxxxxx>
> > To: <modeleng@xxxxxxxxxxxxx>
> > Sent: Friday, February 16, 2007 6:59 PM
> > Subject: [modeleng] Re: Larger Matters
> >
> >
> >> Barry,
> >>
> >> Are you able to glue slippers into place?
> >>
> >> John
> >>
> >>
> >> ----- Original Message -----
> >> From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx>
> >> To: "Model Engineering List" <modeleng@xxxxxxxxxxxxx>
> >> Sent: Saturday, February 17, 2007 5:57 AM
> >> Subject: [modeleng] Larger Matters
> >>
> >>
> >>> Gents,
> >>> I'm afraid to say that I detected a just hint of disdain in some of 
>the
> >> replies to my "Small Matters" so I hope you find the following more
> >> worthy
> >> of your good self's!!
> >>>
> >>> I have tackled any number of problems with steam locomotives and 
>usually
> >> managed to effect some sort of repair but the one job I have always
> >> fought
> >> shy of is fixing worn out axle box / horns. Any ideas for taking up
> >> excess
> >> clearance in this area?
> >>>
> >>> Cheers,
> >>>
> >>>
> >>> Barrie
> >>> MODEL ENGINEERING DISCUSSION LIST.
>

_________________________________________________________________
Get Hotmail, News, Sport and Entertainment from MSN on your mobile.  
http://www.msn.txt4content.com/

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: