I will go with Tim on this, works on my Sweet Pea and on the SVRs' Jinty when it used to have midland injectors. Dave. ----- Original Message ----- From: "Tim Rickard" <the_viffer@xxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Thursday, December 02, 2004 9:47 PM Subject: [modeleng] Re: Injectors I'm skilled in the art of feeding injectors from tank locos. There is, in my experience, no big issue. I leave the water valve open a crack. Every laughs at my locos widdling on the track. The injectors pick up unless the tank is almost empty. I turn the steam valve on at those who laugh and widdle on them. >From: "Dennis Rayner" <dennis.rayner@xxxxxxxxxxxx> >Hi Peter, > >I guess your injector(s) has got "roll" but not "pitch"! As an Elidir >builder myself (not as advanced as yours) I wonder: >are you feeding them from the saddle tank? If you are, I'll be interested >to >hear your experiences as to how warm the water gets >and how they perform. > >Regards >Dennis > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line. MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.