[modeleng] Re: Injectors

Glad you got the problem solved, Peter, as I
understand that injectors, even full-sized, can be
touchy!

Al Messer

--- The Sheppard Residence
<psbr20252@xxxxxxxxxxxxxxxx> wrote:

> All,
> 
> Thank you for your many suggestions.
> 
> Last night after steaming down I inserted a fibre
> washer at the top of 
> the clack and thus give approximately 40 thou more
> lift.
> 
> Tonight I steamed Hercules up again and at 50psi
> tried the injector. 
> Water first, then steam.  Still overflow pouring
> out.  I tried backing 
> off the water, no effect.  So with the water on full
> I just kept on 
> opening the steam (we were now at 80psi), then it
> picked.  And I had it 
> picking down to 50psi and below.
> 
> I swapped injectors and it worked just as well.
> 
> It looks like the extra lift has solved the problem.
> 
> Phew!
> 
> Cheers
> 
> Peter
> 
> 
> MODEL ENGINEERING DISCUSSION LIST.
> 
> To UNSUBSCRIBE from this list, send a blank email
> to, 
> modeleng-request@xxxxxxxxxxxxx with the word
> "unsubscribe" in the subject line.
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: