[modeleng] Fw: Back on Track was HSE

Forgot to add, try and fin some second hand small camera lens filters, 
otherwise, perspex or polycarb. Be careful using the later when you come to 
paint. Do not put any glue tape on plastic or it's drivatives, it goes 
opaque. I just ruined a 5" pannier windows like that, the glue in the tape 
attacks the finish.

Dave


----- Original Message ----- 
From: "Dave Beaman" <davebeaman@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Friday, June 22, 2007 10:01 PM
Subject: Re: [modeleng] Back on Track was HSE


> EKP sell dome headed slotless screws.
>
>
> ----- Original Message ----- 
> From: "Harry Wade" <hww@xxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Friday, June 22, 2007 3:06 PM
> Subject: [modeleng] Back on Track was HSE
>
>
> I have another question for those in the UK about spectacle plate windows,
> in this case the round variety.  What were spectacle plate windows
> typically often retained by?  Both round and flat head rivets of course
> come quickly to mind but I have also seen models which used flat head
> slotted screws and there was no way to know if this was typical of
> prototypical practice or just an easy way to get the windows in and be 
> done
> with it.  My windows will be 2-piece rims (bezels?) and I'll want the 
> glass
> to be replaceable.  That being the case, if round or flat head rivets are
> the norm I'll thread the rivets for nuts rather than head them over.
>
>
> Regards,
> Harry Wade
> Nashville  Tennessee
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
> 



MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: