[modeleng] Re: Etch primer

Alan,

I have used an etch primer produced by Phonex Paints. It is a matt finish
and I have used it as the main coat. BY the time I washed the loco down a
few times and gave it the once over with WD40 the paint took on a semi gloss
finish. It has withstood the test of time.

I recently tried to track the distributors in Sydney but they have long
gone.

Etch primers are usually only put on as a mist coat with the undercoat
applied as soon as the etch primer went off. Depending on Weather conditions
= 10 - 20 minutes.

Regards,

John


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: