[modeleng] Re: Driving in the No-Gloat Zone
- From: "Alan Stepney" <alan@xxxxxxxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Tue, 28 Aug 2007 22:46:21 +0100
I remember that the catalogue cost a fortune. Or at least, far more than I
was prepared to pay.
£50 rings a bell!
Apart from the technical interest, it should be collectable.
Alan Stepney
http://www.alanstepney.info
Model Engineering & steam engine information pages
----- Original Message -----
From: "Harry Wade" <hww@xxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Tuesday, August 28, 2007 5:36 PM
Subject: [modeleng] Driving in the No-Gloat Zone
I just now bought off ebay what I hope will turn out to be an
interesting stack of paper, a copy of the catalogue for the British
Engineerium auction wot wasn't. That should be an interesting read, more
so probably if a way could be found to eliminate words such as rare,
historic, very important, and collectable, ad nauseum, from the
descriptions.
Regards,
Harry
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
- Follow-Ups:
- [modeleng] Re: Driving in the No-Gloat Zone
- From: Harry Wade
- References:
- [modeleng] US Codes is/was Boiler Certificates
- From: Harry Wade
- [modeleng] Re: Boiler Certificates
- From: Alan Stepney
- [modeleng] Driving in the No-Gloat Zone
- From: Harry Wade
Other related posts:
- » [modeleng] Driving in the No-Gloat Zone
- » [modeleng] Re: Driving in the No-Gloat Zone
- » [modeleng] Re: Driving in the No-Gloat Zone
- » [modeleng] Re: Driving in the No-Gloat Zone
- [modeleng] Re: Driving in the No-Gloat Zone
- From: Harry Wade
- [modeleng] US Codes is/was Boiler Certificates
- From: Harry Wade
- [modeleng] Re: Boiler Certificates
- From: Alan Stepney
- [modeleng] Driving in the No-Gloat Zone
- From: Harry Wade