[modeleng] Cast Iron Coolant

From: "Lee Grant" <leegrant@xxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Wed, 26 Oct 2005 20:58:36 +1000

Hi All
I have all ways been told to never to use coolant or cutting oil. when turning 
or milling cast iron and never have. Has anybody got any ideas on why this is.I 
think I was told that it would cause hard spots in the iron.. You always use 
coolant when grinding cast iron or you will end up with burn marks.
Lee 

-- Attached file included as plaintext by Ecartis --
-- Desc: "AVG certification"

No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.361 / Virus Database: 267.12.5/149 - Release Date: 25/10/05

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Re: Cast Iron Coolant
From: shep

[modeleng] Re: Cast Iron Coolant
From: Terry Lane

[modeleng] Re: Cast Iron Coolant
From: Barrie Purslow

[modeleng] Cast Iron Coolant

Other related posts: