[modeleng] Re: Case hardening compound
- From: Patrick Coppens-Marian Lynch <develop@xxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Tue, 31 Jul 2007 14:11:11 +0200
Another way, is using bone dust, the kind that is sold by farming outlets.
This has the same effect, and is a lot cheaper. The composition of
kasenit is very similar to
the aforementioned "bone dust" or bone meal
I have done a couple of items with this compound, and I have noting but
good experiences with it.
The gunsmiths of "the old West" used this method as well.
Patrick
Ken Strauss wrote:
>It is "kasenit". Enco has it as part number 505-0271
>(see
>http://www.use-enco.com/CGI/INPDFF?PMPAGE=683&PARTPG=INLMK3&PMITEM=505-0271
>)
>Prices range from $10.79 for 1 lb to $72.41 for a 10 lb can. They also have
>the stainless steel wrap on the same catalog page.
>
>
>
>>-----Original Message-----
>>From: modeleng-bounce@xxxxxxxxxxxxx [mailto:modeleng-bounce@xxxxxxxxxxxxx]
>>On Behalf Of R.L. Roebuck
>>Sent: Tuesday, July 31, 2007 7:07 AM
>>To: modeleng@xxxxxxxxxxxxx
>>Subject: [modeleng] Case hardening compound
>>
>>Hi there All,
>>
>>I have a few questions relating to case hardening compound.
>>
>>How do you spell casenite/casenit/kasenite/kasenit?
>>
>>Is it still available? I know it was banned at one point a few years ago,
>>but I thought it had become available again.
>>
>>Where can I get it from? Are there any rivals to 'casenite' that are
>>cheaper, better, etc?
>>
>>If 'casenite' was rereleased, possibly with a different composition to get
>>around various rules/regulations, is it still as effective?
>>
>>If anyone has any info, this would be appreciated.
>>
>>
>>Yours,
>>
>>
>>Rich.
>>MODEL ENGINEERING DISCUSSION LIST.
>>
>>To UNSUBSCRIBE from this list, send a blank email to,
>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>>line.
>>
>>
>
>MODEL ENGINEERING DISCUSSION LIST.
>
>To UNSUBSCRIBE from this list, send a blank email to,
>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
>
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
- Follow-Ups:
- [modeleng] Re: Case hardening compound
- From: Jesse Livingston
- References:
- [modeleng] Re: Case hardening compound
- From: Ken Strauss
Other related posts:
- » [modeleng] Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- » [modeleng] Re: Case hardening compound
- [modeleng] Re: Case hardening compound
- From: Jesse Livingston
- [modeleng] Re: Case hardening compound
- From: Ken Strauss