[modeleng] Re: Bijou steam engine ?

If the book was from material published by Village Press, you can order 
photocopies of this material from them.
http://www.villagepress.com/publish_ourpubs.php

It would help if you know the magazine title and the date(s) of the issue(s) 
containing the plans.  Note that one of the magazines with the word "machinist" 
in the title was formerly known as "Projects in Metal".  

Bill Fitt also was involved with "Modeltec", an otherwise unrelated magazine, 
during its first several years.  They have gone bankrupt, so anything from them 
will need to come from a used magazine dealer or similar source.  If the plans 
you seek were from Modeltec, you will be unlikely to have much luck unless you 
already know which issue(s) you need.

Hope this helps.

Charles

-------------- Original message -------------- 
From: sehwuk@xxxxxxx 

> Chaps 
> Â Â Â Â Â Â Does anybody know where I could obtain the drawings/plans for 
> the 
> Dr James Senfit tiny, 'Bijou' steam engine. I've found that the drawings are 
> in 
> a book by William C Fitt but don't really want to pay the £30+ just for 
> these 
> drawings - and besides, I'm not that interested in the other items contained 
> within the book. 
> Â Â Â Â Â Â Any help appreciated and in anticipation. 
> Steve 
> ________________________________________________________________________ 
> Get a FREE AOL Email account with 2GB of storage. Plus, share and store 
> photos 
> and experience exclusively recorded live music Sessions from your favourite 
> artists. Find out more at http://info.aol.co.uk/joinnow/?ncid=548. 
> 
> MODEL ENGINEERING DISCUSSION LIST. 
> 
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: