[modeleng] Re: Adjustable reamers

  • From: "Jesse Livingston" <fernj1@xxxxxxxxxxx>
  • To: <modeleng@xxxxxxxxxxxxx>
  • Date: Tue, 6 Oct 2009 10:29:18 -0500

Peter,

About the only way to use adjustable reamers is in a machine tool where you 
can be sure that the reamer enters the cut perfectly straight.  Speed should 
be slow of course.

Jesse in Rainy Troy, TN


----- Original Message ----- 
From: <peter.chadwick@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Tuesday, October 06, 2009 9:34 AM
Subject: [modeleng] Adjustable reamers


> Has anyone had any success with adjustable reamers? Even with very light
> cuts, I find the blades break so easily that they aren't worthwhile.
> Peter Chadwick
> Swindon
>
>
> ----------
> Zarlink Semiconductor Limited is a Company registered in England and Wales
> under number 00705031 with its registered office at Pure Offices, Kembrey 
> Park, Swindon, Wilts SN2 8BW, England.
>
> This email is confidential and may contain information that is privileged 
> and
> exempt from disclosure by law.  If you have received it in error, please 
> contact
> the sender immediately by return email and then delete it from your 
> system; you
> should not copy it or disclose its contents to anyone.  Emails are not 
> secure
> and cannot be guaranteed to be error free as they can be intercepted, 
> amended,
> lost or destroyed, or contain viruses.  Anyone who communicates with us by 
> email
> is taken to accept these risks.
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.420 / Virus Database: 270.14.4/2417 - Release Date: 10/06/09 
06:50:00

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: