[modeleng] Re: A bit of quickie "watchmaking"

From: "TEL" <tel@xxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Sun, 1 Oct 2006 06:33:09 +1000

very dainty AJ - I'm sure the recipient will be delighted



> "Quickie" as I almost forgot someones birthday: an important event when
you
> are 9.
>
> "Watchmaking"?
> Not exactly but the smallest steam plant I have made.
> Based upon Tubal Cain's Jenny Wren, the height over chimney is 3.5 inches.
> Boiler is 1" diam x 1" high.
> Cylinder is 2mm bore x 3.5mm stroke.
>
> These were taken today, prior to polishing it ready for tomorrow.
> (The coin is a US 1 cent.)
> http://www.alanstepney.info/r1.jpg
> http://www.alanstepney.info/r3.jpg
> http://www.alanstepney.info/r4.jpg
> http://www.alanstepney.info/r7.jpg
>
> Alan
>
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
line.
>

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

References:

[modeleng] Re: Injectors
From: NIGEL MUSKETT

[modeleng] Elevated track systems
From: Harry Wade

[modeleng] Re: Elevated track systems
From: David Archibald

[modeleng] Re: Elevated track systems
From: R.L. Roebuck

[modeleng] second-hand rail
From: kenny.macdougall

[modeleng] Re: second-hand rail
From: Dave Beaman

[modeleng] Re: second-hand rail
From: john_pagett

[modeleng] Re: second-hand rail
From: Dave Beaman

[modeleng] A bit of quickie "watchmaking"
From: alan stepney

[modeleng] Re: A bit of quickie "watchmaking"

Other related posts: