[modeleng] A bit of quickie "watchmaking"

From: "alan stepney" <alan@xxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Sat, 30 Sep 2006 21:16:28 +0100

"Quickie" as I almost forgot someones birthday: an important event when you 
are 9.

"Watchmaking"?
Not exactly but the smallest steam plant I have made.
Based upon Tubal Cain's Jenny Wren, the height over chimney is 3.5 inches.
Boiler is 1" diam x 1" high.
Cylinder is 2mm bore x 3.5mm stroke.

These were taken today, prior to polishing it ready for tomorrow.
(The coin is a US 1 cent.)
http://www.alanstepney.info/r1.jpg
http://www.alanstepney.info/r3.jpg
http://www.alanstepney.info/r4.jpg
http://www.alanstepney.info/r7.jpg

Alan


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Re: A bit of quickie "watchmaking"
From: TEL

[modeleng] Re: A bit of quickie "watchmaking"
From: Shep

[modeleng] Re: A bit of quickie "watchmaking"
From: Allen Messer

References:
- [modeleng] Re: Injectors
  - From: NIGEL MUSKETT
- [modeleng] Elevated track systems
  - From: Harry Wade
- [modeleng] Re: Elevated track systems
  - From: David Archibald
- [modeleng] Re: Elevated track systems
  - From: R.L. Roebuck
- [modeleng] second-hand rail
  - From: kenny.macdougall
- [modeleng] Re: second-hand rail
  - From: Dave Beaman
- [modeleng] Re: second-hand rail
  - From: john_pagett
- [modeleng] Re: second-hand rail
  - From: Dave Beaman

[modeleng] A bit of quickie "watchmaking"

Other related posts: