[modeleng] Re: 3 1/2" gauge Saint

Many thanks John,

Dave.

----- Original Message ----- 
From: "John Baguley" <baggo@xxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, February 23, 2009 7:06 PM
Subject: [modeleng] Re: 3 1/2" gauge Saint


> Ok, I'll sort them out and get them to you,
>
> John
>
> Dave Beaman wrote:
>> Hi John,
>>
>> If you could scan them I would appreciate it. The main drawings I need 
>> are
>> the ones for the regulator, the cylinders and the grate assembly. This 
>> will
>> get me out of the manure. The loco has been beautifully built, the only
>> problem is the frames have been made of brass. The cylinders have come 
>> loose
>> on the frames during running and I need some info there. The regulator is
>> also a problem, I could just take it to bits but it would be nice to see
>> what I might find or what I'm lookin for!!
>>
>> Many thanks in anticipation,
>>
>> Dave.
>>
>> ----- Original Message ----- 
>> From: "John Baguley" <baggo@xxxxxxxxxx>
>> To: <modeleng@xxxxxxxxxxxxx>
>> Sent: Monday, February 23, 2009 4:33 PM
>> Subject: [modeleng] Re: 3 1/2" gauge Saint
>>
>>
>>
>>> Hi Dave,
>>>
>>> if it is the Don Young Saint Christopher, I have the complete set of
>>> LLAS with all the construction articles. These include A3 sized drawings
>>> which are good quality and can be enlarged if necessary. I can scan them
>>> if you want. Reeves still do the drawings at £34 + VAT etc.
>>>
>>> John
>>>
>>> Dave Beaman wrote:
>>>
>>>> Hi Guys,
>>>>
>>>> Just wondering if anyone can help me here. I have just been given a 
>>>> 3.5"
>>>> gauge Saint for restoration and there are now drawings with it. Does
>>>> anyone
>>>> herehaveor know where I can get some? I have it partially stripped down
>>>> but
>>>> need some more info that the drawings would supply.
>>>>
>>>> Thanks in anticipation,
>>>>
>>>> Dave.
>>>>
>>>> MODEL ENGINEERING DISCUSSION LIST.
>>>>
>>>> To UNSUBSCRIBE from this list, send a blank email to,
>>>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the 
>>>> subject
>>>> line.
>>>>
>>>>
>>>>
>>>>
>>>>
>>> MODEL ENGINEERING DISCUSSION LIST.
>>>
>>> To UNSUBSCRIBE from this list, send a blank email to,
>>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the 
>>> subject
>>> line.
>>>
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>> line.
>>
>>
>>
>>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: