[modeleng] Re: 3 1/2" gauge Saint

Ok, I'll sort them out and get them to you,

John

Dave Beaman wrote:
> Hi John,
>
> If you could scan them I would appreciate it. The main drawings I need are 
> the ones for the regulator, the cylinders and the grate assembly. This will 
> get me out of the manure. The loco has been beautifully built, the only 
> problem is the frames have been made of brass. The cylinders have come loose 
> on the frames during running and I need some info there. The regulator is 
> also a problem, I could just take it to bits but it would be nice to see 
> what I might find or what I'm lookin for!!
>
> Many thanks in anticipation,
>
> Dave.
>
> ----- Original Message ----- 
> From: "John Baguley" <baggo@xxxxxxxxxx>
> To: <modeleng@xxxxxxxxxxxxx>
> Sent: Monday, February 23, 2009 4:33 PM
> Subject: [modeleng] Re: 3 1/2" gauge Saint
>
>
>   
>> Hi Dave,
>>
>> if it is the Don Young Saint Christopher, I have the complete set of
>> LLAS with all the construction articles. These include A3 sized drawings
>> which are good quality and can be enlarged if necessary. I can scan them
>> if you want. Reeves still do the drawings at £34 + VAT etc.
>>
>> John
>>
>> Dave Beaman wrote:
>>     
>>> Hi Guys,
>>>
>>> Just wondering if anyone can help me here. I have just been given a 3.5"
>>> gauge Saint for restoration and there are now drawings with it. Does 
>>> anyone
>>> herehaveor know where I can get some? I have it partially stripped down 
>>> but
>>> need some more info that the drawings would supply.
>>>
>>> Thanks in anticipation,
>>>
>>> Dave.
>>>
>>> MODEL ENGINEERING DISCUSSION LIST.
>>>
>>> To UNSUBSCRIBE from this list, send a blank email to,
>>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>>> line.
>>>
>>>
>>>
>>>
>>>       
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>> line. 
>>     
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to, 
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line.
>
>
>
>   
MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: