[modeleng] Re: 3 1/2" gauge Saint

Hi John,

If you could scan them I would appreciate it. The main drawings I need are 
the ones for the regulator, the cylinders and the grate assembly. This will 
get me out of the manure. The loco has been beautifully built, the only 
problem is the frames have been made of brass. The cylinders have come loose 
on the frames during running and I need some info there. The regulator is 
also a problem, I could just take it to bits but it would be nice to see 
what I might find or what I'm lookin for!!

Many thanks in anticipation,

Dave.

----- Original Message ----- 
From: "John Baguley" <baggo@xxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Sent: Monday, February 23, 2009 4:33 PM
Subject: [modeleng] Re: 3 1/2" gauge Saint


> Hi Dave,
>
> if it is the Don Young Saint Christopher, I have the complete set of
> LLAS with all the construction articles. These include A3 sized drawings
> which are good quality and can be enlarged if necessary. I can scan them
> if you want. Reeves still do the drawings at £34 + VAT etc.
>
> John
>
> Dave Beaman wrote:
>> Hi Guys,
>>
>> Just wondering if anyone can help me here. I have just been given a 3.5"
>> gauge Saint for restoration and there are now drawings with it. Does 
>> anyone
>> herehaveor know where I can get some? I have it partially stripped down 
>> but
>> need some more info that the drawings would supply.
>>
>> Thanks in anticipation,
>>
>> Dave.
>>
>> MODEL ENGINEERING DISCUSSION LIST.
>>
>> To UNSUBSCRIBE from this list, send a blank email to,
>> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>> line.
>>
>>
>>
>>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
> line. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: