Re: [MoAccess] initializing motif es
- From: "D!J!X!" <megamansuperior@xxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Fri, 3 Apr 2009 16:11:15 -0400
I had 1 of those boxes that had a button on it, When it was off, sticking
out, the box was in throughput mode, where each input sent what it got right
back out through the port. When it was on, pressed in, it didn't do this. Is
this your case? Have you checked the button?
D!J!X!
_____
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Omar Binno
Sent: Friday, April 03, 2009 8:29 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] initializing motif es
The problem happens when i'm not in sonar also. The local won't turn sounds
off with the way i have the current midi connections to the midi interface.
Once I remove midi cables, everything works fine. Just to reiterate, my midi
connection is as follows:
Motif midi out going to the midi in (A) of interface.
Motif midi in going to the midi out (A) of the interface.
Note: I have the 2x2 interface, and it has midi in and out A and B, which is
why I specified which of the ports I'm connecting the motif to.
Omar Binno
Website: www.omarbinno.com
AIM: LOD1116
Skype: obinno1
----- Original Message -----
From: Jose <mailto:Jose@xxxxxxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Friday, April 03, 2009 8:21 AM
Subject: Re: [MoAccess] initializing motif es
In Sonar, in the options menu, go to project, then to midi in, and set echo
to none. It's set to auto by default. You can get there by shift tabbing
about 4 times once you are in the midi in settings option.
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Omar Binno
Sent: Thursday, April 02, 2009 6:02 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] initializing motif es
Yup just got it. Here's another problem I'm having now though. I'm trying to
use midi rather than usb to work with the es and sonar. I'm connecting it to
a midiman 2x2 interface. This is how I have my routing set up. From midi out
of the motif, into midi in (A,) of the interface, and midi in from the
motif, into the midi out (A) of the interface. However, what happens now is
when I turn local off, I still get sounds from the keyboard. I'm assuming my
routing is wrong somewhere and I'm getting a midi loop of some sort. Yes,
no?
OMAR BINNO
AIM: LOD1116
SKYPE: obinno1
WEBSITE: www.omarbinno.com
----- Original Message -----
From: Adrian <mailto:driza97@xxxxxxxxxxxxx> Stewart
To: MoAccess@xxxxxxxxxxxxx
Sent: Thursday, April 02, 2009 6:43 PM
Subject: Re: [MoAccess] initializing motif es
make sure you press the utility button first and then press the rest of the
buttons that you listed! yep!
What Da Hzzy!
Driza aka Drizabizeats
----- Original Message -----
From: Omar Binno <mailto:omarbinno@xxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Thursday, April 02, 2009 4:26 PM
Subject: [MoAccess] initializing motif es
Hello,
I'm trying to initialize my motif es and it doesn't seem to be working. The
steps I'm following are:
press job, then press enter, then press yes. However, the user patches are
not returning to the factory settings. Am I missing any steps here?
Thanks.
OMAR BINNO
AIM: LOD1116
SKYPE: obinno1
WEBSITE: www.omarbinno.com
Other related posts:
