[liure] Re: liure Digest V1 #4

  • From: heberth ardila <heberthardila@xxxxxxxxx>
  • To: liure@xxxxxxxxxxxxx
  • Date: Mon, 18 Jan 2010 09:15:23 -0500

boi a tratar de mejorar el diseño de la helice a ver que pasa!!

El 18 de enero de 2010 01:05, FreeLists Mailing List Manager <
ecartis@xxxxxxxxxxxxx> escribió:

> liure Digest    Sun, 17 Jan 2010        Volume: 01  Issue: 004
>
> In This Issue:
>                [liure] openbook
>                [liure]  windows7 pecados
>                [liure] helice
>                [liure] Re: helice
>
> ----------------------------------------------------------------------
>
> Date: Sun, 17 Jan 2010 08:46:19 -0500
> From: cristian paul =?iso-8859-1?Q?pe=F1aranda?= rojas <
> paul@xxxxxxxxxxxxxxxx>
> Subject: [liure] openbook
>
> hola
>
> me acabo de econtrar este proyecto:
>
> http://www.openbookproject.net
>
>
> Tiene de todo, libre y colaborativo
>
>
> recuerde para escribir a a la lista con un
> correo a liure@xxxxxxxxxxxxx
>
>
> saludos
>
> Cristian Paul
>
> ------------------------------
>
> Date: Sun, 17 Jan 2010 15:27:37 -0500
> From: cristian paul =?iso-8859-1?Q?pe=F1aranda?= rojas <
> paul@xxxxxxxxxxxxxxxx>
> Subject: [liure]  windows7 pecados
>
>
> http://es.windows7sins.org/
>
> ------------------------------
>
> Date: Sun, 17 Jan 2010 18:29:36 -0500
> Subject: [liure] helice
> From: heberth ardila <heberthardila@xxxxxxxxx>
>
> con el reprap
>
>
>
> ------------------------------
>
> Date: Sun, 17 Jan 2010 20:49:12 -0500
> From: cristian paul =?iso-8859-1?Q?pe=F1aranda?= rojas <
> paul@xxxxxxxxxxxxxxxx>
> Subject: [liure] Re: helice
>
>
> hebert, podrias hacer algunos ajustes como evitar esos huecos [1] que hay
> antes del centro del rotor,
> creo son los que ponen loco el sofware para volver el diseño imprimible [1]
> no se que pasa bien pero siempre toma mal el archivo y
> comete algun error como no convertir las aletas del rotor :/
>
> [1]
> This should never happen, there is a hole in the triangle mesh, each edge
> should have two faces.
> ---
>
> On Sun, Jan 17, 2010 at 06:29:36PM -0500, heberth ardila wrote:
> >  se esta realizandouna helice para un helicopteroel cual esta se
> imprimira
> > con el reprap
>
>
>
> ------------------------------
>
> End of liure Digest V1 #4
> *************************
>
>

Other related posts:

  • » [liure] Re: liure Digest V1 #4 - heberth ardila